Dialogue Tech NANO-PV-D510A user manual PCI/PnP, Floppy, Forced FDD, Hard Disk, Cdrom

		NANO-PV-D510A User Manual
Auto	DEFAULT	BIOS auto-detects the current USB.
Floppy		The USB device will be emulated as a floppy drive.
		The device can be either A: or B: responding to
		INT13h calls that return DL = 0 or DL = 1
		respectively.
Forced FDD		Allows a hard disk image to be connected as a
		floppy image. This option works only for drives
		formatted with FAT12, FAT16 or FAT32.
Hard Disk		Allows the USB device to be emulated as hard disk
		responding to INT13h calls that return DL values of
		80h or above.
CDROM		Assumes the CD-ROM is formatted as bootable
		media. All the devices that support block sizes
		greater than 512 bytes can only be booted using this
		option.

5.4 PCI/PnP

Use the PCI/PnP menu (BIOS Menu 15) to configure advanced PCI and PnP settings.

WARNING!

Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction.

Page 96