Dialogue Tech NANO-PV-D510A user manual Audio Cable Connection

NANO-PV-D510A User Manual

Step 5: Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit

connector. Pin 1 on the audio cable connector is indicated with a white dot. See

Figure 4-13.

Figure 4-13: Audio Cable Connection

Connect the audio devices. Connect speakers to the line-out audio jack. Connect the output of an audio device to the line-in audio jack. Connect a microphone to the mic-in audio jack.

4.6.3 Keyboard/Mouse Connector

The NANO-PV-D510A is shipped with a keyboard/mouse Y-cable connector. The keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the NANO-PV-D510A and branches into two cables that are each connected to a PS/2 connector, one for a mouse and one for a keyboard. To connect the keyboard/mouse Y-cable connector, please follow the steps below.

Page 52