
NOTE:
If the Linux OS is not installed with GRUB (v0.97 or earlier) and Ext3, the Symantec Ghost may not function properly.
While installing Linux OS, please create two partitions:
Partition 1: /
Partition 2: SWAP
NOTE:
Please reserve enough space for partition 3 for saving recovery images.
Figure B-19: Partitions for Linux
Step 3: Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow Step 1 ~ Step 3 described in Section B.2.2. Then type the following
commands (marked in red) to create a partition for recovery images.
system32>diskpart DISKPART>list vol DISKPART>sel disk 0 DISKPART>create part pri size= ___
DISKPART>assign letter=N
DISKPART>exit
Page 131