Dialogue Tech NANO-PV-D510A user manual VGA Monitor Connection, USB Connector

NANO-PV-D510A User Manual

Figure 4-19: USB Connector

4.7.5 VGA Monitor Connection

The NANO-PV-D510A has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the NANO-PV-D510A, please follow the instructions below.

Step 3: Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 4: Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 5: Insert the VGA connector. Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

NANO-PV-D510A. See Figure64-20.

Page 59