Dialogue Tech NANO-PV-D510A user manual Power Configuration, Ansi, VT-UTF8

		NANO-PV-D510A User Manual
Boot Loader		Redirection is active during POST and during Boot
		Loader
Always	DEFAULT	Redirection is always active (Some OSes may not
		work if set to Always)

Terminal Type [ANSI]

Use the Terminal Type BIOS option to specify the remote terminal type.

ANSI	DEFAULT	The target terminal type is ANSI
VT100		The target terminal type is VT100
VT-UTF8		The target terminal type is VT-UTF8

VT-UTF8 Combo Key Support [Disabled]

Use the VT-UFT8 Combo Key Support option to enable additional keys that are not provided by VT100 for the PC 101 keyboard.

The VT100 Terminal Definition is the standard convention used to configure and conduct emergency management tasks with UNIX-based servers. VT100 does not support all keys on the standard PC 101-key layout, however. The VT-UTF8 convention makes available additional keys that are not provided by VT100 for the PC 101 keyboard.

Disabled DEFAULT Disables the VT-UTF8 terminal keys

EnabledEnables the VT-UTF8 combination key. Support for ANSI/VT100 terminals

5.3.6 Power Configuration

The Power Configuration menu (BIOS Menu 9) configures the Advanced Configuration and AT/ATX Power and Power Interface (ACPI) options.

Page 86