Dialogue Tech NANO-PV-D510A user manual Anti-static Precautions, Installation Considerations

NANO-PV-D510A User Manual

4.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

NANO-PV-D510A may result in permanent damage to the

NANO-PV-D510A and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components, including the NANO-PV-D510A. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the NANO-PV-D510A or any other electrical component is handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband: Wearing a simple anti-static wristband can help to prevent ESD from damaging the board.

Self-grounding: Before handling the board, touch any grounded conducting material. During the time the board is handled, frequently touch any conducting materials that are connected to the ground.

Use an anti-static pad: When configuring the NANO-PV-D510A, place it on an antic-static pad. This reduces the possibility of ESD damaging the NANO-PV-D510A.

Only handle the edges of the PCB: When handling the PCB, hold the PCB by the edges.

4.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should be read and understood before installation. All installation notices must be strictly adhered to. Failing to adhere to these precautions may lead to severe damage and injury to the person performing the installation.

Page 38