Dialogue Tech NANO-PV-D510A user manual IDE Configuration, Disabled

NANO-PV-D510A User Manual

Frequency: Lists the CPU processing speed

FSB Speed: Lists the FSB speed

Cache L1: Lists the CPU L1 cache size

Cache L2: Lists the CPU L2 cache size

5.3.2 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration of the IDE devices installed in the system.

BIOS SETUP UTILITY

Main	Advanced	PCIPNP	Boot	Security	Chipset		Exit
IDE Configuration						DISABLED: disable the
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯						integrated IDE
ATA/IDE Configuration			[Enhanced]			controller.
Configure SATA as			[IDE]			PRIMARY: enables only
> Primary IDE Master			: [Not Detected]			the Primary IDE
						controller
> Primary IDE Slave			: [Not Detected]			SECONDARY: enables only
> Secondary IDE Master			: [Not Detected]			the Secondary IDE
> Secondary IDE Slave			: [Not Detected]			controller.
> Third IDE Master			: [Not Detected]			BOTH: enables both IDE
> Third IDE Slave			: [Not Detected]			controllers

Select Screen

↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit

v02.67 ©Copyright 1985-2009, American Megatrends, Inc.

BIOS Menu 4: IDE Configuration

ATA/IDE Configurations [Compatible]

Use the ATA/IDE Configurations option to configure the ATA/IDE controller.

Disabled Disables the on-board ATA/IDE controller.

CompatibleConfigures the on-board ATA/IDE controller to be in compatible mode. In this mode, a SATA channel will replace one of the IDE channels. This mode supports up to 4 storage devices.

Page 68