Figure B-1: Recovery Tool Setup Menu
Step 5: Press <5> then <Enter>.
Figure B-2: Command Mode
Step 6: The command prompt window appears. Type the following commands (marked in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.
(Press <Enter> after entering each line below)
system32>diskpart DISKPART>list vol DISKPART>sel disk 0 DISKPART>create part pri size= ___
DISKPART>assign letter=N
DISKPART>create part pri size= ___
DISKPART>assign letter=F DISKPART>exit system32>format N: /fs:ntfs /q /y system32>format F: /fs:ntfs /q /v:Recovery /y system32>exit
Page 121
