Dialogue Tech NANO-PV-D510A COM 3 Function Select Jumper, CompactFlash Card Setup, JCF1

NANO-PV-D510A User Manual

Figure 4-5: Clear BIOS Jumper Location

4.4.4 COM 3 Function Select Jumper

Jumper Label:	J1
Jumper Type:	3-pin header
Jumper Settings:	See Table 4-5
Jumper Location:	See Figure 4-6

The COM 3 Function Select jumper sets the communication protocol used by the third serial communications port (COM 3) as RS-232, RS-422/RS-485. The COM 3 Function Select settings are shown in the table below.

Setting

Description

Short 1-2	RS-232
Short 2-3	RS-422/RS-485

Table 4-5: COM 3 Function Select Jumper Settings

Figure 4-6: COM 3 Function Select Jumper Location

4.4.5 CompactFlash® Card Setup

Jumper Label:	JCF1
Jumper Type:	2-pin header
Jumper Settings:	See Table 4-6
Jumper Location:	See Figure 4-7

Page 45