Dialogue Tech NANO-PV-D510A user manual Super IO Configuration, A.R.T Auto

NANO-PV-D510A User Manual

S.M.A.R.T [Auto]

Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.

Auto	DEFAULT BIOS auto detects HDD SMART support.
Disabled	Prevents BIOS from using the HDD SMART feature.
Enabled	Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.

DisabledPrevents the BIOS from using 32-bit data transfers.

Enabled DEFAULT Allows BIOS to use 32-bit data transfers on supported hard disk drives.

5.3.3 Super IO Configuration

Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the FDD controllers, parallel ports and serial ports.

BIOS SETUP UTILITY

Main

Advanced PCIPNP Boot Security Chipset Exit

Configure ITE8718 Super I/O Chipset		Allows BIOS to select
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯		Serial Port Base
Serial Port1 Address	[3F8]	Addresses
Serial Port1 IRQ	[IRQ3]
Serial Port2 Address	[2F8]
Serial Port2 IRQ	[IRQ4]
Serial Port3 Address	[2F8]		Select Screen
Serial Port3 IRQ	[IRQ3]
Serial Port4 Address	[2F8]	↑ ↓	Select Item
Serial Port4 IRQ	[IRQ4]	Enter	Go to SubScreen
Parallel Port Address	[378]	F1	General Help
Parallel Port Mode	[Normal]	F10	Save and Exit
Parallel Port IRQ	[IRQ7]	ESC	Exit

v02.67 ©Copyright 1985-2009, American Megatrends, Inc.

BIOS Menu 6: Super IO Configuration

Page 74