NANO-PV-D510A User Manual

Step 6: Locate the connector. The location of the keyboard/mouse Y-cable connector is shown in Chapter 3.

Step 7: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on the NANO-PV-D510A keyboard/mouse connector. See Figure 4-14.

Step 8: Insert the cable connectors Once the cable connector is properly aligned with the keyboard/mouse connector on the NANO-PV-D510A, connect the cable connector to the on-board connectors. See Figure 4-14.

Figure 4-14: Keyboard/mouse Y-cable Connection

Step 9: Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable connector is connected to two PS/2 connectors. To secure the PS/2 connectors to the chassis please refer to the installation instructions that came with the chassis.

Step 10: Connect the keyboard and mouse. Once the PS/2 connectors are connected to the chassis, a keyboard and mouse can each be connected to one of the

Page 53

Page 67
Image 67
Dialogue Tech NANO-PV-D510A user manual Keyboard/mouse Y-cable Connection