The CompactFlash® slot is connected through an IDE connection. This jumper sets the CompactFlash® card as the master or slave IDE device.
Setting
Description
Open
Closed
Slave
Master
Table 4-6: CompactFlash® Setup Jumper Settings
Figure 4-7: CompactFlash® Setup Jumper Location
4.4.6 LVDS Voltage Selection
WARNING:
Incorrect voltages can destroy the LCD panel. Make sure to select a voltage that matches the voltage required by the LCD panel.
Jumper Label: | J_VLVDS1 |
Jumper Type: | |
Jumper Settings: | See Table |
Jumper Location: | See Figure |
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD panel.
Page 46
