Dialogue Tech NANO-PV-D510A user manual 3BC, Epp, Ecp

NANO-PV-D510A User Manual

Parallel Port Address [Disabled]

Use the Parallel Port Address option to select the parallel port base address.

Disabled DEFAULT No base address is assigned to the Parallel Port

378	Parallel Port I/O port address is 378
278	Parallel Port I/O port address is 278
3BC	Parallel Port I/O port address is 3BC

Parallel Port Mode [Normal]

Use the Parallel Port Mode option to select the mode the parallel port operates in.

Normal	DEFAULT	The normal parallel port mode is the standard mode
		for parallel port operation.
Bi-directional		Parallel port outputs are 8-bits long. Inputs are
		accomplished by reading 4 of the 8 bits on the
		status register.
EPP		The parallel port operates in the enhanced parallel
		port mode (EPP). The EPP mode supports
		bi-directional communication between the system
		and the parallel port device and the transmission
		rates between the two are much faster than the
		Normal mode.
ECP		The parallel port operates in the extended
		capabilities port (ECP) mode. The ECP mode
		supports bi-directional communication between the
		system and the parallel port device and the
		transmission rates between the two are much faster
		than the Normal mode

Page 77