4.3 Memory Installation
WARNING:
Do not run the CPU without a heatsink and fan. Without the heatsink and fan, the high temperatures can destroy the CPU and other components. CPUs marked as fanless don't need the fan, but still need adequate ventilation.
The CPU, CPU cooling kit and DIMM are the most critical components of the
4.3.1 CompactFlash® Installation
NOTE:
Both CompactFlash® Type I and Type II cards are supported.
To install the CompactFlash® card, please follow the steps below.
Step 1: Locate the CF card socket. Locate the CompactFlash® slot.
Step 2: Align the CF card. Align the CompactFlash® card. The label side should be
facing away from the board. The grooves on the CompactFlash® slot ensure
that the card cannot be inserted the wrong way.
Step 3: Insert the CF card. Push until the CompactFlash® card is firmly seated in the
slot. See Figure
Page 40
