WARNING:
The installation instructions described in this manual should be carefully followed in order to prevent damage to the components and injury to the user.
Before and during the installation please DO the following:
Read the user manual:
o The user manual provides a complete description of the
Wear an electrostatic discharge cuff (ESD):
o Electronic components are easily damaged by ESD. Wearing an ESD cuff removes ESD from the body and helps prevent ESD damage.
Place the NANO-PV-D510A on an antistatic pad:
o When installing or configuring the motherboard, place it on an antistatic pad. This helps to prevent potential ESD damage.
Turn all power to the NANO-PV-D510A off:
o When working with the
Before and during the installation of the
Remove any of the stickers on the PCB board. These stickers are required for warranty validation.
Use the product before verifying all the cables and power connectors are properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its components.
Page 39
