Dialogue Tech NANO-PV-D510A 1 AT/ATX Power Connection, Power Cable to Motherboard Connection

NANO-PV-D510A User Manual

4.6.1 AT/ATX Power Connection

Follow the instructions below to connect the NANO-PV-D510A to an AT or ATX power supply.

WARNING:

Disconnect the power supply power cord from its AC power source to prevent a sudden power surge to the NANO-PV-D510A.

Step 1: Locate the power cable. The power cable is shown in the packing list in Chapter 3.

Step 2: Connect the Power Cable to the Motherboard. Connect the 4-pin (2x2) Molex

type power cable connector to the AT/ATX power connector on the motherboard.

See Figure 4-11.

Figure 4-11: Power Cable to Motherboard Connection

Page 50