
4.4.2 AT/ATX Power Select Jumper Settings
Jumper Label: | J_ATXCTL1 |
Jumper Type: | |
Jumper Settings: | See Table |
Jumper Location: | See Figure |
The AT Power Select jumper specifies the systems power mode as AT or ATX.
Setting
Description
Short | Use AT power |
|
|
Short | Use ATX power |
|
|
Table 4-3: AT/ATX Power Select Jumper Settings
Figure 4-4: AT/ATX Power Select Jumper Settings
4.4.3 Clear CMOS Jumper
Jumper Label: | J_CMOS1 |
Jumper Type: | |
Jumper Settings: | See Table |
Jumper Location: | See Figure |
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more, then move back to the default position.
Setting
Description
Keep current BIOS setup
Clear BIOS
Table
Page 44