|
| |
Disabled |
| USB 2.0 controller disabled |
Enabled | DEFAULT | USB 2.0 controller enabled |
Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support.
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded onto the system.
Disabled |
| Legacy USB support disabled |
Enabled | DEFAULT | Legacy USB support enabled |
Auto |
| Legacy USB support disabled if no USB devices are |
|
| connected |
USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
FullSpeedThe controller is capable of operating at 12 Mb/s
HiSpeed DEFAULT The controller is capable of operating at 480 Mb/s
5.3.8.1 USB Mass Storage Device Configuration
Use the USB Mass Storage Device Configuration menu (BIOS Menu 14) to configure
USB mass storage class devices.
Page 94
