VigorFly 200 Series User’s Guide
94
choosing the frequency, please select AutoSelect to let
system determine for you.
OK Click it to save and apply such setting.
Packet-OVERDRIVE This feature can enhance the performance in data
transmission about 40%* more (by checking Tx Burst). It
is active only when both sides of Access Point and Station
(in wireless client) invoke this function at the same time.
That is, the wireless client must support this feature and
invoke the function, too.
Note: Vigor N61 wireless adapter supports this function.
Therefore, you can use and install it into your PC for
matching with Packet-OVERDRIVE (refer to the following
picture of Vigor N61 wireless utility window, choose
Enable for TxBURST on the tab of Option).
Universal Repeater If such mode is enabled, the access point can act as a
wireless repeater; it can be Station and AP at the same time.
It can use Station function to connect to a Root AP and use
AP function to service all wireless stations within its
coverage.
Check this box to enable the function. Besides, it will be
displayed on the Wireless LAN for you to access for
detailed configuration.
Open Wireless LAN>>Universal Repeater. Please refer to
the corresponding section for detailed information.