Click OK to save these settings.
4.7.7 Management
This page allows you to manage the settings for access control, access list, port setup, and SMP setup. For example, as to management access control, the port number is used to send/receive SIP message for building a session.
Enable HTTP/ICMP | Enable the checkbox to allow system administrators to login |
Ping/Telnet | from the Internet. There are several servers provided by the |
| system to allow you managing the router from Internet. |
| Check the box(es) to specify. |
Access List | You could specify that the system administrator can only |
| login from a specific host or network defined in the list. A |
| maximum of three IPs/subnet masks is allowed. |
| List IP - Indicate an IP address allowed to login to the |
| router. |
| Subnet Mask - Represent a subnet mask allowed to login to |
| the router. |
4.7.8 Reboot System
The Web Configurator may be used to restart your router for using current configuration. Click Reboot System from System Maintenance to open the following page.
Click Yes. The router will take 5 seconds to reboot the system.
VigorFly 200 Series User’s Guide | 121 |
