Administration Password | Draytek 200 guide

MAC Address	Display the MAC address of the LAN or WAN or WLAN
	Interface.
IP Address	Display the MAC address of the LAN or WAN Interface.
IP Mask	Display the subnet mask address of the LAN or WAN
	interface.
Device Type	Display the device type used for wireless LAN.
SSID	Display the SSID of this router.
Channel	Display the channel that wireless LAN used.
Connected Type	Display the network connection type for this router.
Link Status	Display if current network is connected or not.
Default Gateway	Display the gateway address of the WAN interface.
Primary DNS	Display the specified primary DNS setting.
Secondary DNS	Display the specified secondary DNS setting.

4.7.2 Administration Password

This page allows you to set new password for admin operation.

Account	Type in the name for login.
Password	Type in new password in this filed.

When you click OK, the login window will appear. Please use the new login name and password to access into the web configurator for admin operation again.

4.7.3 User Password

This page allows you to set new password for user operation.

Account	Type in the name for login.
Password	Type in new password in this filed.
	116	VigorFly 200 Series User’s Guide

Image 124

Draytek 200 manual Administration Password, Display the Ssid of this router

Contents

Page VigorFly Wi-Fi Router User’s Guide Safety Instructions and Approval Copyright Information European Community Declarations Regulatory Information Table of Contents 104 Trouble Shooting 127 Page Web Configuration Buttons Explanation Preface LED Indicators and Connectors LED Hardware Installation Printer Installation Open Start-Settings- Printer and Faxes VigorFly 200 Series User’s Guide VigorFly 200 Series User’s Guide VigorFly 200 Series User’s Guide VigorFly 200 Series User’s Guide Accessing Web Two-Level Management Changing Password VigorFly 200 Series User’s Guide Setting up the Password Quick Start Wizard Setting up the Time and Date Setting up the Internet Connection Static IP Dhcp Mode PPPoE Always On Choose it to enable router always keep PPTP/L2TP 3G USB Modem Setting up the Wireless Connection Enable Wireless LANSecurity Mode Hide Ssid WEP Key 1 ~ Key WPA/PSK or WPA2/PSK or Mixed WPA+WPA2/PSK WPA AlgorithmPass Phrase Key Renewal Interval Session Timeout Idle TimeoutWEP/802.1x Port WPA/802.1x WPA Algorithms WPA2/802.1x Pre-AuthenticationPMK Cache Period Mixed WPA+WPA2/802.1x Online Status Saving the Wizard ConfigurationOnline status for Dhcp Displays the IP address of the default gateway Saving ConfigurationDisplays the IP address of the WAN interface This page is left blank WAN Basics of Internet Protocol IP Network Get Your Public IP Address from ISP What are Public IP Address and Private IP AddressNetwork Connection by 3G USB Modem Internet Access IP Address Type the IP address Subnet Mask ISP should provide you with usually more than one DNS Router Name After passing through the time without any action. When you Type the subnet mask if you chose Static IP as the WAN IP 3G USB Modem 2 3G Backup Enable 3G Backup LAN Basics of LAN General Setup What is Routing Information Protocol RIP Disable Nd IP Address ConfigurationEnable Server Disable Server NAT Open Ports DMZ Host Click DMZ Host to open the following Wireless LAN ApplicationsDynamic DNS Basic Concepts Security Overview Mode Enable for TxBurst on the tab of Option Isolate MemberChannel Packet-OVERDRIVE Security Universal Repeater Disable WEP WEP Key1-Key4 WPA/PSK or WPA2/PSK or Mixed WPA+WPA2/PSK Key RenewalInterval WEP/802.1x 802.1x WEP Enable Enable the WEP EncryptionWill not be encrypted WPA/802.1x Radius server and client share a secret that is used to WPA2/802.1x Mixed WPA+WPA2/802.1x Default is 3600 seconds. Set 0 to disable re-key.? Universal Repeater MAC Address Optional WPA/PSK Mode and WPA2/PSK Mode Encryption Type Open / Shared Mode Encryption TypeWEP Keys Display the Ssid of the connecting client Station List System Maintenance System Status User Password Time and DateDevice Type Connected Type Firmware Upgrade System Log DiagnosticsDhcp Table Support Area Refresh Click it to reload VigorFly 200 Series User’s Guide Admin Mode Operation What are Public IP Address and Private IP Address Type the gateway IP address Dhcp Confirm Password Server IP 3G USB Modem 2 3G Backup LAN What is Static Route 2nd IP Address 2nd Subnet Mask Static Route DestinationRange Netmask NAT Open Ports DMZ Host Denial of Service DoS Defense FirewallSession Limit Basics for Firewall DoS Defense 2 MAC/IP/Port Filtering Content Filtering Web Content FilterURL Content Filter System Security Web Content Filter Web URL Filter Settings Applications Click it to save and apply such setting 2 802.1d Spanning Tree UPnP Configuration Igmp Cant work with Firewall Software Security Considerations Wireless LAN General Setup Ssid Packet-OVERDRIVE Security WEP Key1-Key4 WPA/PSK or WPA2/PSK or Mixed WPA+WPA2/PSK 802.1x WEP WPA/802.1x 100 101 102 103 Access Control Policy Cancel Clean all entries in the MAC address list Click it to save the access control list5 WPS Enable WPS WPS Auth ModeConfigure via Push WPS Current Status 6 WDS Configure via ClientPinCode 108 Phy Mode Click this button to save the configurationSecurity Key 110 111 AP Discovery WMM Configuration Add to Access Control Access Contro lAckPolicy Auth 115 Administration Password Display the Ssid of this router Configuration Backup Backup the Configuration Restore Configuration Mail box while the router detecting the items you Syslog/Mail AlertSpecify here 120 Reboot System Enable HTTP/ICMPAccess List Management 122 123 Click it to reload 125 126 Trouble Shooting Checking If the Hardware Status Is OK or Not For Windows For MacOs Pinging the Router from Your Computer For MacOs Terminal Checking If the ISP Settings are OK or Not For Static Users For PPPoE Users Run Router Tools Firmware Upgrade Utility For PPTP/L2TP Users 134 135 Backing to Factory Default Setting If Necessary Software ResetHardware Reset Contacting Your Dealer