VigorFly 200 Series User’s Guide 27
IP Address Displays the IP address of the LAN interface.
TX Packets Displays the total transmitted packets at the LAN interface.
RX Packets Displays the total number of received packets at the LAN
interface.
WAN Status
IP Displays the IP address of the WAN interface.
GW IP Displays the IP address of the default gateway.
Mode Displays the type of WAN connection (e.g., PPPoE).
Up Time Displays the total uptime of the interface.
Primary DNS Displays the primary DNS setting.
Secondary DNS Displays the secondary DNS setting.
TX Packets Displays the total transmitted packets at the WAN interface.
TX Rate Displays the speed of transmitted octets at the WAN
interface.
RX Packets Displays the total number of received packets at the WAN
interface.
RX Rate Displays the speed of received octets at the WAN interface.
Note: The words in green mean that the WAN connection of that interface is ready for
accessing Internet; the words in red mean that the WAN connection of that interface is not
ready for accessing Internet.
2
2.
.6
6
S
Sa
av
vi
in
ng
g
C
Co
on
nf
fi
ig
gu
ur
ra
at
ti
io
on
n
Each time you click OK on the web page for saving the configuration, you can find messages
showing the system interaction with you.
Ready indicates the system is ready for you to input settings.
Settings Saved means your settings are saved once you click Finish or OK button.