Draytek 200 manual WPA/PSK or WPA2/PSK or Mixed WPA+WPA2/PSK, Key Renewal, Interval, WEP/802.1x

zWPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK

Accepts only WPA clients and the encryption key should be entered in PSK. The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in this field below or automatically negotiated via 802.1x authentication.

WPA Algorithm	Select TKIP, AES or TKIP/AES as the algorithm for WPA.
Pass Phrase	Either 8~63 ASCII characters, such as 012345678..(or 64
	Hexadecimal digits leading by 0x, such as
	"0x321253abcde...").
Key Renewal	WPA uses shared key for authentication to the network.
Interval	However, normal network operations use a different
	encryption key that is randomly generated. This randomly
	generated key that is periodically replaced. Enter the
	renewal security time (seconds) in the column. Smaller
	interval leads to greater security but lower performance.
	Default is 3600 seconds. Set 0 to disable re-key.

zWEP/802.1x

The built-in RADIUS client feature enables the router to assist the remote dial-in user or a wireless station and the RADIUS server in performing mutual authentication. It enables centralized remote access authentication for network management.

The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in this field below or automatically negotiated via 802.1x authentication. Select WPA, WPA2 or Auto as WPA mode.

VigorFly 200 Series User’s Guide 51