VigorFly 200 Series User’s Guide
52
802.1x WEP Disable - Disable the WEP Encryption. Data sent to the AP
will not be encrypted.
Enable - Enable the WEP Encryption.
Click the link of RADIUS Server to access into the following page for more settings.
IP Address Enter the IP address of RADIUS server.
Port The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
Shared Secret The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Session Timeout Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
Idle Timeout Set the maximum time that a wireless device may remain