4.6.7 Universal Repeater
This menu is available only when it is enabled in Wireless LAN>>General Setup. It allows you to specify which AP that remote client can connect to.
The access point can act as a wireless repeater; it can be Station and AP at the same time. It can use Station function to connect to a Root AP and use AP function to serve all wireless stations within its coverage.
Note: While using Universal Repeater Mode, the access point will demodulate the received signal. Please check if this signal is noise for the operating network, then have the signal modulated and amplified again. The output power of this mode is the same as that of WDS and normal AP mode.
SSID | Set a name for the router to be identified. |
MAC Address (Optional) | Type the MAC address of the Access Point that VigorFly |
| 200 wants to connect to. |
Security Mode | There are several modes provided for you to choose. Each |
| mode will bring up different parameters (e.g., WEP keys, |
| Pass Phrase) for you to configure. |
110 | VigorFly 200 Series User’s Guide |
