Draytek 200 manual For IP Routing Usage, Disable Nd IP Address, Nd Subnet Mask, PPPoE Passthrough

	network (Default: 192.168.1.1).
Subnet Mask	Type in an address code that determines the size of the
	network. (Default: 255.255.255.0)
For IP Routing Usage	Click Enable to invoke this function. The default setting is
	Disable.
2nd IP Address	Type in secondary IP address for connecting to a subnet.
	(Default: 192.168.2.1)
2nd Subnet Mask	An address code that determines the size of the network.
PPPoE Passthrough	If you want to use PPPoE server in the network via Vigor
	router, please check this box to redirect the PPPoE frames
	to the specified location.
DHCP Server	DHCP stands for Dynamic Host Configuration Protocol.
Configuration	The router by factory default acts a DHCP server for your
	network so it automatically dispatch related IP settings to
	any local user configured as a DHCP client. It is highly
	recommended that you leave the router enabled as a DHCP
	server if you do not have a DHCP server for your network.
	If you want to use another DHCP server in the network
	other than the Vigor Router’s, you can let Relay Agent help
	you to redirect the DHCP request to the specified location.
Enable Server	Let the router assign IP address to every host in the LAN.
Disable Server	Let you manually assign IP address to every host in the
	LAN.
Start IP Address	Enter a value of the IP address pool for the DHCP server to
	start with when issuing IP addresses. If the 1st IP address
	of your router is 192.168.1.1, the starting IP address must
	be 192.168.1.2 or greater, but smaller than 192.168.1.254.
End IP Address	Enter a value of the IP address pool for the DHCP server to
	end with when issuing IP addresses.
Subnet Mask	Type in an address code that determines the size of the
	network. (Default: 255.255.255.0/ 24)
Default Gateway	Enter a value of the gateway IP address for the DHCP
	server. The value is usually as same as the 1st IP address of
	the router, which means the router is the default gateway.
Lease Time	It allows you to set the leased time for the specified PC.
DNS Manual Setting	If this function is enabled, LAN PCs use Primary DNS
	Server and Secondary DNS Server as their DNS servers.
	Otherwise, LAN PCs use the router as their DNS server
	and the router will do DNS proxy for them.
Primary DNS Address	You must specify a DNS server IP address here because
	your ISP should provide you with usually more than one
	DNS Server. If your ISP does not provide it, the router will
	automatically apply default DNS Server IP address:
	194.109.6.66 to this field.
Secondary DNS Address	You can specify secondary DNS server IP address here
	because your ISP often provides you more than one DNS
	Server. If your ISP does not provide it, the router will
	40	VigorFly 200 Series User’s Guide