Draytek 200 manual PPPoE, Dhcp Mode

DHCP

It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server.

DHCP Mode	Router Name – Default setting is VigorFly200.
Enable	The router will detect the MAC address automatically. Or,
	check the box to enable MAC address cloning.
MAC Address Clone	It is available when the box of Enabled is checked. Click
	MAC Address Clone. The router will detect the MAC
	address automatically. And the result will be displayed in the
	field of MAC Address.

Besides, if you want to change the MAC address for WAN interface, simply click Enable and type the MAC address in this field manually.

After finishing the settings here, please click Next.

PPPoE

PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a common broadband medium, such as a single DSL line, wireless device or cable modem. All the users over the Ethernet can share a common connection.

PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection for accessing the Internet. Your service provider will provide you information about user name, password, and authentication mode.

VigorFly 200 Series User’s Guide 15