VigorFly 200 Series User’s Guide 23
W
WP
PA
A/
/8
80
02
2.
.1
1x
x
The WPA encrypts each frame transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or automatically negotiated via 802.1x
authentication.
WPA Algorithms Select TKIP, AES or TKIP/AES as the algorithm for WPA.
Key Renewal Interval WPA uses shared key for authentication to the network.
However, normal network operations use a different
encryption key that is randomly generated. This randomly
generated key that is periodically replaced. Enter the renewal
security time (seconds) in the column. Smaller interval leads
to greater security but lower performance. Default is 3600
seconds. Set 0 to disable re-key.
IP Address Enter the IP address of RADIUS server.
Port The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
Shared Secret The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Session Timeout Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
Idle Timeout Set the maximum time that a wireless device may remain
idle. (The unit is second.)