Firmware Upgrade | Draytek 200 instruction

3.6.4 Firmware Upgrade

Before upgrading your router firmware, you need to install the Router Tools. The Firmware Upgrade Utility is included in the tools. The following web page will guide you to upgrade firmware by using an example. Note that this example is running over Windows OS (Operating System).

Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site is www.draytek.com (or local DrayTek's web site) and FTP site is ftp.draytek.com.

Click System Maintenance>> Firmware Upgrade to launch the Firmware Upgrade Utility.

Click Browse.. to locate the newest firmware and click Upgrade. During the process of upgrade, do not turn off your router.

VigorFly 200 Series User’s Guide

63

Image 71

Draytek 200 manual Firmware Upgrade

Contents

Page VigorFly Wi-Fi Router User’s Guide Copyright Information Safety Instructions and Approval Regulatory Information European Community Declarations Table of Contents 104 Trouble Shooting 127 Page Preface Web Configuration Buttons Explanation LED LED Indicators and Connectors Hardware Installation Open Start-Settings- Printer and Faxes Printer Installation VigorFly 200 Series User’s Guide VigorFly 200 Series User’s Guide VigorFly 200 Series User’s Guide VigorFly 200 Series User’s Guide Two-Level Management Accessing Web Changing Password VigorFly 200 Series User’s Guide Quick Start Wizard Setting up the Password Setting up the Internet Connection Setting up the Time and Date Static IP PPPoE Dhcp Mode Always On Choose it to enable router always keep PPTP/L2TP 3G USB Modem Hide Ssid Setting up the Wireless ConnectionEnable Wireless LAN Security Mode Key 1 ~ Key WEP Key Renewal Interval WPA/PSK or WPA2/PSK or Mixed WPA+WPA2/PSKWPA Algorithm Pass Phrase Port Session TimeoutIdle Timeout WEP/802.1x WPA Algorithms WPA/802.1x PMK Cache Period Pre-AuthenticationWPA2/802.1x Mixed WPA+WPA2/802.1x Online status for Dhcp Saving the Wizard ConfigurationOnline Status Displays the IP address of the WAN interface Saving ConfigurationDisplays the IP address of the default gateway This page is left blank Basics of Internet Protocol IP Network WAN Network Connection by 3G USB Modem What are Public IP Address and Private IP AddressGet Your Public IP Address from ISP IP Address Type the IP address Subnet Mask Internet Access ISP should provide you with usually more than one DNS Router Name After passing through the time without any action. When you Type the subnet mask if you chose Static IP as the WAN IP 3G USB Modem Enable 3G Backup 2 3G Backup Basics of LAN LAN What is Routing Information Protocol RIP General Setup Disable Server Disable Nd IP AddressConfiguration Enable Server Open Ports NAT DMZ Host Click DMZ Host to open the following Basic Concepts Wireless LANApplications Dynamic DNS Security Overview Mode Packet-OVERDRIVE Enable for TxBurst on the tab of OptionIsolate Member Channel Universal Repeater Security WEP Disable WEP Key1-Key4 WEP/802.1x WPA/PSK or WPA2/PSK or Mixed WPA+WPA2/PSKKey Renewal Interval Will not be encrypted Enable Enable the WEP Encryption802.1x WEP WPA/802.1x Radius server and client share a secret that is used to WPA2/802.1x Mixed WPA+WPA2/802.1x Default is 3600 seconds. Set 0 to disable re-key.? MAC Address Optional Universal Repeater WEP Keys Open / Shared Mode Encryption TypeWPA/PSK Mode and WPA2/PSK Mode Encryption Type Station List Display the Ssid of the connecting client System Status System Maintenance Connected Type User PasswordTime and Date Device Type Firmware Upgrade Dhcp Table DiagnosticsSystem Log Refresh Click it to reload Support Area VigorFly 200 Series User’s Guide Admin Mode Operation What are Public IP Address and Private IP Address Type the gateway IP address Dhcp Confirm Password Server IP 3G USB Modem 2 3G Backup LAN What is Static Route 2nd Subnet Mask 2nd IP Address Netmask Static RouteDestination Range NAT Open Ports DMZ Host Basics for Firewall Denial of Service DoS DefenseFirewall Session Limit DoS Defense 2 MAC/IP/Port Filtering System Security Content FilteringWeb Content Filter URL Content Filter Web URL Filter Settings Web Content Filter Applications 2 802.1d Spanning Tree Click it to save and apply such setting Igmp UPnP Configuration Security Considerations Cant work with Firewall Software Wireless LAN General Setup Ssid Packet-OVERDRIVE Security WEP Key1-Key4 WPA/PSK or WPA2/PSK or Mixed WPA+WPA2/PSK 802.1x WEP WPA/802.1x 100 101 102 103 Policy Access Control 5 WPS Click it to save the access control listCancel Clean all entries in the MAC address list WPS Current Status Enable WPSWPS Auth Mode Configure via Push PinCode Configure via Client6 WDS 108 Key Phy ModeClick this button to save the configuration Security 110 111 AP Discovery WMM Configuration Auth Add to Access ControlAccess Contro l AckPolicy 115 Display the Ssid of this router Administration Password Backup the Configuration Configuration Backup Restore Configuration Specify here Syslog/Mail AlertMail box while the router detecting the items you 120 Management Reboot SystemEnable HTTP/ICMP Access List 122 123 Click it to reload 125 126 Checking If the Hardware Status Is OK or Not Trouble Shooting For Windows For MacOs For MacOs Terminal Pinging the Router from Your Computer Checking If the ISP Settings are OK or Not For PPPoE Users For Static Users For PPTP/L2TP Users Run Router Tools Firmware Upgrade Utility 134 135 Contacting Your Dealer Backing to Factory Default Setting If NecessarySoftware Reset Hardware Reset