Draytek 200 Isolate Member, Channel, Packet-OVERDRIVE, Enable for TxBurst on the tab of Option

Hide SSID	Check it to prevent from wireless sniffing and make it
	harder for unauthorized clients or STAs to join your
	wireless LAN. Depending on the wireless utility, the user
	may only see the information except SSID or just cannot
	see any thing about Vigor wireless router while site
	surveying. The system allows you to set three sets of SSID
	for different usage.
SSID	Set a name for the router to be identified.
Isolate Member	Check this box to make the wireless clients (stations) with
	the same SSID not accessing for each other.
Channel	Means the channel of frequency of the wireless LAN. The
	default channel is 6. You may switch channel if the selected
	channel is under serious interference. If you have no idea of
	choosing the frequency, please select AutoSelect to let
	system determine for you.

Packet-OVERDRIVE	This feature can enhance the performance in data
	transmission about 40%* more (by checking Tx Burst). It
	is active only when both sides of Access Point and Station
	(in wireless client) invoke this function at the same time.
	That is, the wireless client must support this feature and
	invoke the function, too.
	Note: Vigor N61 wireless adapter supports this function.
	Therefore, you can use and install it into your PC for
	matching with Packet-OVERDRIVE (refer to the following
	picture of Vigor N61 wireless utility window, choose
	Enable for TxBurst on the tab of Option).

VigorFly 200 Series User’s Guide 47