PPTP/L2TP
If you click PPTP/L2TP as the connection type, please manually enter the Username/Password provided by your ISP and all the required information.
L2TP/PPTP Server IP | Specify the IP address of the PPTP/L2TP server. |
Address |
|
User Name | Assign a specific valid user name provided by the ISP. |
Password | Assign a valid password provided by the ISP. |
WAN IP Network Settings | You can choose Static IP or DHCP as address mode setting. |
IP Address | Type the IP address if you choose Static IP as the WAN IP |
| network setting. |
Subnet Mask | Type the subnet mask if you chose Static IP as the WAN IP. |
Redial Policy | If you want to connect to Internet all the time, you can choose |
| Always On. |
| Always On – Choose it to enable router always keep |
| connection. |
| Connect On Demand - If the connection has been idled over |
| the value, the router will drop the connection. |
| Idle Time - Set the timeout for breaking down the Internet |
| after passing through the time without any action. The unit is |
| seconds. The range is XX ~ XX. |
MAC Address Clone | It is available when the box of Enabled is checked. Click |
| Clone MAC Address. The router will detect the MAC |
VigorFly 200 Series User’s Guide | 17 |
