Self Contained Wireless Alarm System v1.0
[014] Second System Options
Opt | Def. ON | OFF |
1 | Arm/Disarm Bell Squawk Enabled | Arm/Disarm Bell Squawk Disabled |
2Future Use
3 | RF Jam Log After 5 Minutes | RF Jam Logs After 20 seconds |
4 | Aux Boost Enabled | Aux Boost Disabled |
5Future Use
6 | Audible Exit With Urgency | Silent Exit Delay |
7Future Use
8 Fire Bell is ContinuousFire Bell Follows Bell
[015] Third System Options
Opt | Def. ON | OFF |
1 | [F] Key Enabled | [F] Key Disabled |
2 | [P] Key Audible (Bell/Beeps) | [P] Key Silent |
3 | Quick Exit Enabled | Quick Exit Disabled |
4 | Quick Arming Enabled ([ ][0] and Function Keys) | Quick Arming Disabled (Function Key Requires Code) |
5 | Code Required for Bypassing | No Code Required |
6 | Master Code not Changeable | Master Code Changeable |
7 | TLM Enabled | TLM Disabled |
8 | System Tamper Enabled | System Tamper Disabled |
[016] Fourth System Options
Opt | Def. ON | OFF |
1 | Cross Zoning Enabled | Police Code enabled |
2 | Exit Delay Restart Enabled (required for | Exit Delay Restart Disabled |
3 | Blank Keypad When Not Used | Keypad Always Active |
4 | Code Required to Remove Keypad Blanking | No Code Required |
5 | Keypad Backlighting Enabled | Keypad Backlighting Disabled |
6 | ID WKEY Not required for Disarming | ID WKEY Required for Disarming |
7 | Bypass Status Displayed While Armed | Bypass Status Not Displayed While Armed |
8 | Daylight Saving Time Enabled | Daylight Saving Time Disabled |
[023] Tenth System Options
Opt Def. ON
1[F] Key Beeps Only
2Future Use
3Test Transmission while Armed Only
4Test Transmission Counter in Hours
5Switching from Away to Stay Disabled
*6 | New Alarms will not disconnect |
7Trouble beeps are Silent
8Keyswitch Arms in Away Mode
OFF
[F] Key Beeps and Sounds Bell
Test Transmission while Armed/Disarmed Test Transmission Counter in Days Away to Stay Toggle Option Permitted New Alarms disconnect
*Applies to SCW9047 version only. This option must be OFF for UL Listed Installations
18WWW.DIYALARMFORUM.COM
