![Section [381] Second Communicator Options](/images/new-backgrounds/55025/5502587x1.webp)
Self Contained Wireless Alarm System v1.0
Section [381] Second Communicator Options
Option Description
[1]ON: Opening After Alarm Keypad Ringback Enabled. When the Opening After Alarm reporting code is successfully transmitted to a programmed telephone number, the keypad will sound a series of 8 beeps to confirm to the end user that the Opening After Alarm Code was sent and received. This Ringback will occur for each Opening After Alarm code successfully reported.
OFF: Opening After Alarm Keypad Ringback Disabled. Disabled
[2]Future Use
[3]ON: SIA Uses Programmed Reporting Codes. The system uses programmed reporting codes when transmitting using the SIA format.
OFF: SIA Uses Automatic Reporting Codes. The system automatically generates all reporting codes transmitted.
[4]ON: Closing Confirmation Enabled. The system beeps the keypad 8 times after successfully transmitting a Closing reporting event.
OFF: Closing Confirmation Disabled. The keypad does not beep.
[5]ON: Talk/Listen on Phone #1/3 Enabled. If Talk/Listen is requested for an event, the panel will request the session on the next
communication on Phone Number 1/3 (via
OFF: Talk/Listen on Phone #1/3 Disabled. The panel will not request a Talk/Listen session.
[6]ON: Talk/Listen on Phone #2 Enabled. If Talk/Listen is requested for an event, the panel will request the session on the next
communication on Phone Number 2 (via
OFF: Talk/Listen on Phone #2 Disabled. The panel will not request a Talk/Listen session.
[7]ON: Contact ID Uses Programmed Reporting Codes. The system uses Contact ID format programmed reporting codes when
transmitting reporting codes. OFF: Contact ID Uses Automatic Reporting Codes. The system automatically generates all reporting codes transmitted.
[8]Future Use
Section [382] Third Communicator Options
Option Description
[1]ON: Partial Closing Identifier is ‘5’. The system will use the digit [5] as the first digit of the Partial Closing reporting code when
transmitting Contact ID reporting codes. OFF: Partial Closing Identifier is ‘4’. The system will use the digit [4] as the first digit of the Partial Closing reporting code when transmitting Contact ID reporting codes.
[2]ON: Alarm Communications Enabled During Walk Test. The system will transmit all alarms during Walk Test.
OFF: Alarm Communications Disabled During Walk Test. The system will not report alarm events during Walk Test.
[3]ON: Communications Cancelled Message Enabled. The keypad will display the message ‘Communications Cancelled’ upon
successful transmission of the Communication Cancelled reporting event. OFF: Communications Cancelled Message Disabled. The keypad will not display these messages. (ON for SIA
[4]ON: Call Waiting Cancel Enabled. The system dials the Call Waiting Cancel string on the first attempt to dial the central station.
OFF: Call Waiting Cancel Disabled. The system does not dial the Call Waiting Cancel string.
[7]ON: Residential Dialing Attempts are 1. Number of Dialing Attempts is one when using Residential Dial communication format.
OFF: Residential Dialing Attempts are 5. Residential Dial Follows Dialling Attempt counter.
[8]Future Use
Section [401] First Downloading Options
Option Description
[1]ON: Answering Machine Double Call Enabled. The system answers incoming calls for downloading (either Programmed Number
of Rings or Double Call). OFF: Answering Machine Double Call Disabled. The system does not answer incoming calls for double call attempts, but will still answer on Programmed Number of Rings.
![Section [382] Third Communicator Options](/images/new-backgrounds/55025/5502587xi2.webp){kind=small}
These settings do not affect the 6 hour DLS downloading window on power up.
[2]ON: User Can Enable DLS Window. The user can enable downloading for the DLS downloading window (double call only) using the [ ][6] command.
OFF: User Can NOT Enable DLS Window. The user can not enable the DLS downloading window using the [ ][6] command.
[3]ON: Call Back Enabled. The system will hang up after a successful DLS connection and call the computer back using the DLS
Phone Number (Section [402]). OFF: Call Back Disabled. The system stays connected to the computer.
