Section 3 – Installation
Unpacking
Carefully open your shipping container, and make sure it contains the items shown on the shipping documents. Inspect all items, and report any missing items or damage immediately.
Placing
Make certain generator placement and cable routing do not interfere with normal operation. Maintain easy access
CAUTION
To minimize electri - cal noise and eliminate ground currents, ground the chassis as shown.
Use a STAR configuration
(illustrated below). Do not DAISY CHAIN the grounds.
to your equipment.
The operator should have unobstructed access to cables and wiring.
RFI Grounding
Proper grounding for the generator chassis is essential for the effective suppression of electrical noise or RFI (Radio Frequency Interference). Every ultrasonic generator contains a RFI filter that blocks noise on the
Chassis Grounding
Stud
Recommended protective earth ground connection wire color: green or green with yellow stripe.
Earth
Ground
Fixed Probe Mount
or 2nd Chassis
Grounding Stud
#14 Gauge
Stranded or
Solid Wire
3rd Chassis Grounding Stud
AC power line from entering the system control circuitry. This filter also prevents ultrasonic frequency noise from being fed back into the AC power line. For the RFI filter to operate effectively, it is necessary to correctly ground the system.
Connect a grounding wire from the grounding stud connection (see Figure
See Connecting Cables on the next page.
NOTE
Chassis Grounding Stud
The chassis grounding stud is used to attach a protective earth ground to the generator. This will aid in the suppression of electrical interference or radio frequency interference (RFI) that is common in a industrial environment. Stud location is shown in Figure
CAUTION
If you have any questions about the grounding of your equipment and/or the electri- cal box, contact a qualified electrician.
Dukane Manual Part No. | Page 11 |
