Dukane iQ Series user manual Process Fault Status Screens Time and Energy Modes

iQ Series, Ultrasonic Hand Held Systems User’s Manual

Process Fault Status Screens - Time and Energy Modes
Status Text Displayed		System Status or Fault Explanation
Latch On Fault ENABLED	Latch On Fault DISABLED
Process Fault	Process Fault
Set Weld	Set Weld	Set Weld Time Not Reached, or
Time Not Reached	Time Not Reached
Enter Clears Fault		Set Weld Energy Not Reached - appears if the
		weld ends before the set time or energy is reached
Process Fault	Process Fault	(respectively) due to operator error, or
Set Weld	Set Weld	because the weld was intentionally aborted.
Energy Not Reached	Energy Not Reached
Enter Clears Fault
Process Fault	Process Fault
Peak Overload	Average Overload
Time Not Reached	Time Not Reached
Enter Clears Fault
		Peak Overload, Average Overload, Frequency Lock
Process Fault	Process Fault	Lost, Input Undervoltage, or Over Temperature is
Frequency Lock Lost	Over Temperature	displayed in place of Set Weld Time not Reached,
Energy Not Reached	Energy Not Reached	or Set Weld Energy not Reached, if the weld ends
Enter Clears Fault
		before the set time or energy is reached due to a
Process Fault		process or generator fault.
Input Undervoltage
Energy Not Reached
Enter Clears Fault
Table 7-IIPop-Up Fault Status Screens - Time and Energy Modes

Page  50 Dukane Manual Part No. 403-577-01