`

 

 

 

 

IC-7000 CAM User’s Guide

 

 

 

 

Pan/Tilt IP Surveillance Camera

 

 

 

 

 

 

 

 

 

 

 

 

 

Scenario 6

 

 

 

 

 

 

 

 

 

The way to access Internet

ADSL or Cable Modem

 

 

 

Public IP address required?

Yes, one dynamically-allocated public IP

 

 

 

 

 

address is required

 

 

 

DHCP server required?

Must be equipped with DHCP and NAT

 

 

 

 

 

function

 

 

 

Network Setup for IP -CAM

LAN Enable / Manually

 

 

 

 

 

 

 

 

This scenario is best for:

Users with several dynamic IP addresses and

 

 

 

 

 

several IP-CAMs installed

 

1.Please obtain the PPPoE username and password from your ISP.

2.Connect the red test network cable to the RJ-45 Ethernet jack located on the rear of IP-CAM. The other end is connected to the network card of computer

3.Refer to 2.4-3 PPPoE - IP Address Settings to input PPPoE account and password.

4.Please type the Mail server setup information in IP-CAM setup utility.

5.Connect IP-CAM to LAN Hub.

6.Use CAM_EZ Search utility to find out the dynamic IP address assigned by ISP for each IP-CAM.

7.Open IP browser and type in the physical IP address (such float IP is dispatched by ISP) of the IP-CAM, e.g., http://211.78.174.94.

8.Follow the steps above to configure for each IP-CAM.

. IP-CAM Network Framework Installation 7

 

The way to access Internet

ADSL or Cable Modem

 

 

Public IP address required?

One static public IP address required

 

 

 

 

 

 

DHCP server required?

Must be equipped with DHCP and NAT

 

 

 

 

 

IC-7000 USER’S GUIDE

PAGE 23/62

Rev. PV1.0

Page 23
Image 23
Edimax Technology IC-7000 user manual 23/62