Edimax Technology IC-7000 2.4-2 DHCP

` IC-7000 CAM User’s Guide

IC-7000 USER’S GUIDE PAGE 14/62 Rev. PV1.0

Example:

1. Set up the IP CAM with static IP address.

2. Turn on your computer and launch IE browser. Type 211.78.174.94:( 1025、

1026、1039….) in the Address line. Now you can see the monitoring screen on

web browser.

2.4-2 DHCP - IP Address Setting:

z Use RJ-45 Ethernet cable (red) to connect ADSL host and LAN hub. Then

use RJ-45 Ethernet cable (blue) to connect PC and IP CAM (as shown

below).

z Connect the power adaptor to the power port (on the rear) of IP-CAM. Now,

the status LED on the top of IP-CAM will be illuminated.

z Set up the connection way inside the PC network: Please go to

Contents

Main I 0 00 70 -7 Page Page Page Page How to insert SD card: Micro p 1.7 HOW TO CONNECT THE CAMERA TO TV SET Anchor Frame Screw (P head M3.5X25) Page Page 2.4-1 STATIC - IP Address Setting IC-7000 2.4-2 DHCP - IP Address Setting: Page Figure 5 2.4-3 PPPoE - IP Address Setting 1. 2. Scenario 1. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear Page 3. Page 2. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear of D 7. Launch IE browser and type in the public IP address (such public IP is 7. Open IP browser and type in the physical IP address (such float IP is dispatched by Page Page Figure 3 Figure 4.1 Page Page 1. Page Page Page Page - Motion Detec Set:Adjust settings for motion detection. ( ) Page Page Page Page Individual or both set signal input triggers can be selected. Page - NTP Server Page Page Page Page Page Page Page Page Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on Ok. Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on ok. Page APPENDIX B. FAQ: 1. 2. 3. General questions for IP Camera Page Installation Problems of IP Camera