Edimax Technology IC-7000

` IC-7000 CAM User’s Guide

IC-7000 USER’S GUIDE PAGE 51/62 Rev. PV1.0

name and password.

Step 7: Go to Dynamic DNS from the “Account” menu, and click on “Add Host”. The

following message should appear:

Step 8: The “Services” menu should automatically appear. Choose your Domain Name

(gotdns.com has been used in this example).

Step 9: Enter your Host Name (mjipcam001 has been used in this example). Click “Add

Host” to finish.

Contents

Main I 0 00 70 -7 Page Page Page Page How to insert SD card: Micro p 1.7 HOW TO CONNECT THE CAMERA TO TV SET Anchor Frame Screw (P head M3.5X25) Page Page 2.4-1 STATIC - IP Address Setting IC-7000 2.4-2 DHCP - IP Address Setting: Page Figure 5 2.4-3 PPPoE - IP Address Setting 1. 2. Scenario 1. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear Page 3. Page 2. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear of D 7. Launch IE browser and type in the public IP address (such public IP is 7. Open IP browser and type in the physical IP address (such float IP is dispatched by Page Page Figure 3 Figure 4.1 Page Page 1. Page Page Page Page - Motion Detec Set:Adjust settings for motion detection. ( ) Page Page Page Page Individual or both set signal input triggers can be selected. Page - NTP Server Page Page Page Page Page Page Page Page Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on Ok. Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on ok. Page APPENDIX B. FAQ: 1. 2. 3. General questions for IP Camera Page Installation Problems of IP Camera