Edimax Technology IC-7000

` IC-7000 CAM User’s Guide

IC-7000 USER’S GUIDE PAGE 54/62 Rev. PV1.0

Step 5: Change the IP Address to 192.168.2.5. Change Subnet mask to 255.255.255.0.

The default gateway is 192.168.2.254 (Change the IP address to any numbers

within the range of 192.168.2.4 – 192.168.2.253). Click on “ok”.

Step 6: In EZ Search Tool, click ‘update’ ahain to search for IPCAM on the local network.

Double click on “IC-7000” from the list, and your browser will automatically bring you to the

IC-7000 EZ IPCAM login window.

Please refer to page 10 of this user manual for descriptions on how to browse the surveillance

video from the IC-7000 EZ CAM.

IP Address(I):192.168.2.5

Subnet Mask (U):255.255.255.0

Default Gateway(D):192.168.2.254

Contents

Main I 0 00 70 -7 Page Page Page Page How to insert SD card: Micro p 1.7 HOW TO CONNECT THE CAMERA TO TV SET Anchor Frame Screw (P head M3.5X25) Page Page 2.4-1 STATIC - IP Address Setting IC-7000 2.4-2 DHCP - IP Address Setting: Page Figure 5 2.4-3 PPPoE - IP Address Setting 1. 2. Scenario 1. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear Page 3. Page 2. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear of D 7. Launch IE browser and type in the public IP address (such public IP is 7. Open IP browser and type in the physical IP address (such float IP is dispatched by Page Page Figure 3 Figure 4.1 Page Page 1. Page Page Page Page - Motion Detec Set:Adjust settings for motion detection. ( ) Page Page Page Page Individual or both set signal input triggers can be selected. Page - NTP Server Page Page Page Page Page Page Page Page Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on Ok. Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on ok. Page APPENDIX B. FAQ: 1. 2. 3. General questions for IP Camera Page Installation Problems of IP Camera