`

 

 

IC-7000 CAM User’s Guide

 

 

Pan/Tilt IP Surveillance Camera

 

 

 

 

 

 

 

 

 

 

functions

 

 

Network Setup for IP -CAM

LAN Enable / Manually

 

 

 

 

 

 

This scenario is best for:

Users with one static public IP address,

 

 

 

several IP-CAMs installed, used residential

 

 

 

router to access internet

 

1.Set a public IP address (e.g., 211.78.174.01) for the public IP of your residential router, which is assigned by your ISP. Then, set another private IP address and activate DHCP server function of residential router.

2.For the IP configuration for each IP-CAM, please assign an unique private IP address for every IP-CAM. In the Http Port setting, please give an unique port number to every IP-CAM (Please refer to 2.4-1 STATIC - IP Address Settings to set IP address properly.)

3.For the instruction of port mapping function of residential router, please refer to IP and port settings of camera to make proper configuration.

4.To view the image of IP-CAM from remote computer: Launch IP browser and type the public IP address of the residential router and the port number of IP-CAM, e.g., http:// 211.78.174.01:1025.

IC-7000 USER’S GUIDE

PAGE 24/62

Rev. PV1.0

Page 24
Image 24
Edimax Technology IC-7000 user manual 24/62