Edimax Technology IC-7000 user manual Http Server, DNS Server

`

IC-7000 CAM User’s Guide

Pan/Tilt IP Surveillance Camera

Note: Some ISP assigns IP address dynamically, so the IP address you obtained from ISP for the IC-7000 IP-CAM may very every time when you connected to internet, and there will be problem when you want to connect your IP-CAM from the other computer on internet. To solve this problem, you can use a residential router which comes with DDNS client with this IP-CAM.

5.4.3HTTP Server

This menu allows you to enter the port number of the IC-7000 IPCAM internal web server (or HTTP Server) via HTTP protocol. The default port number is “80”.

5.4.4DNS Server

This menu allows you to enter the IP address of the DNS (Domain Name Service) server. By doing this, you can replace the IP address of the IP CAM with an http name (such as myIPCAM.XXX), making it easier to remember. The default DNS1 value is “168.95.1.1” (Hinet/CHT). If the connection fails, the system will automatically attempt to connect to the IP address of DNS2. ** DNS Server really work in this way?

5.5SERVER SETUP

This menu allows you to enter various server settings, including:

-Mail Server

-FTP Server

-DDNS Server

-NTP Server

IC-7000 USER’S GUIDE PAGE 42/62 Rev. PV1.0