Edimax Technology IC-7000

` IC-7000 CAM User’s Guide

IC-7000 USER’S GUIDE PAGE 52/62 Rev. PV1.0

Step 10: After the new hostname has successfully created, the following screen should

appear:

B. Connecting to the IC-7000 EZ IPCAM (Using the CAM_EZ Search Tool)

Step 1: Please connect the IC-7000 EZ IPCAM to the HUB as shown in following chart:

Step 2: Open CAM_EZ Search. Click on “Update” to begin searching for any IC-7000 EZ

IPCAM connected to the local network. The menu should automatically display the

EZ IPCAM under the name “IC-7000”. It is recommended that you change its IP

address to 192.168.2.3 (factory default) first. For gateway, it is recommended that

you use 192.168.2.253. Click “submit” to update.

Contents

Main I 0 00 70 -7 Page Page Page Page How to insert SD card: Micro p 1.7 HOW TO CONNECT THE CAMERA TO TV SET Anchor Frame Screw (P head M3.5X25) Page Page 2.4-1 STATIC - IP Address Setting IC-7000 2.4-2 DHCP - IP Address Setting: Page Figure 5 2.4-3 PPPoE - IP Address Setting 1. 2. Scenario 1. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear Page 3. Page 2. Connect the red test network cable to the RJ-45 Ethernet jack located on the rear of D 7. Launch IE browser and type in the public IP address (such public IP is 7. Open IP browser and type in the physical IP address (such float IP is dispatched by Page Page Figure 3 Figure 4.1 Page Page 1. Page Page Page Page - Motion Detec Set:Adjust settings for motion detection. ( ) Page Page Page Page Individual or both set signal input triggers can be selected. Page - NTP Server Page Page Page Page Page Page Page Page Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on Ok. Page Page Step 4: Select Internet Protocol (TCP/IP), and click on the preferences (R). Click on ok. Page APPENDIX B. FAQ: 1. 2. 3. General questions for IP Camera Page Installation Problems of IP Camera