` IC-7000 CAM User’s Guide
P
Pa
an
n/
/T
Ti
il
lt
t
I
IP
P
S
Su
ur
rv
ve
ei
il
ll
la
an
nc
ce
e
C
Ca
am
me
er
ra
a
IC-7000 USER’S GUIDE PAGE 37/62 Rev. PV1.0
- In 160x120 resolution, the motion detection is fixed to the entire image.
Note: 1. Motion detection can exist PC and SD Card ** 2. Image will be stored to ‘C: \tmp\webmd’ directory. 4.5 MOTOR CONTROL
1. — Home , return to the middle place. 2. — Up, press it to move camera up. 3. — Down , press it to move camera down. 4. — Left, press it to move camera left. 5. — Right , press it to move camera right. 6. — Auto , after press this bottom, camera will pan between left and right automatically. 5. ADVANCED APPLICATION
This section describes the advanced settings of the IC-7000 IP-CAM, including:
- Image Setup
- Capture View
- Network Setup
- Server Setup
- Event Trigger Setup
- Administration Setup
- Software Update
5.1 IMAGE SETUP
This includes:
- Resolution:Users can select between image resolution of 160x120, 320x240, and
640x480. The default resolution is 320x240.
- Quality: Users can select between “fine”, “normal”, and “basic” image quality. The
default image quality is “basic”.
- Anti-Flicker:Users can select between 60Hz for USA and Canada, 50Hz for Australia
and Europe, or Outdoor for when you are using this camera in an environment without
artificial light; The default setting is 50Hz.
- Audio:Audio output. Default setting is “off”.
- Rotate 180: This setting turns the image upside-down for when the camera is mounted
to a ceiling; Default setting is “off”.
- IR Auto Detection:IR LED will be activated automatically when there’s no enough light. Default setting is “on”
- Message: LiveView characters are hidden，Default setting is “on”**
Instructions for image setup:
Step 1. Click to enter imageset me nu, the default settings are shown