Viewing Network Information | Enterasys Networks MicroMMAC-T

The MicroMMAC-T Chassis View

station list, and transmit a Remove Ring Station MAC frame to the offending station. This option is enabled by default.

NOTE

This feature is available for devices running firmware versions 3.00.09 and later only.

Viewing Network Information

At the Network Information window (Figure 2-9), you can view status and configuration information for each ring in your MicroMMAC-T-controlled hub. You can identify each ring by name using the Network Name field.

To access the Network Information window:

1.At the MicroMMAC-T Chassis View window, click on the Network menu selection, then on the Network 1 entry to display the Network menu selections.

2.Click on Network Info.... The Network Information window will appear.

Selecting the Ring

If there is more than one ring network residing in your hub, you can view information for each ring by using the Previous and Next buttons. By default, the rings are identified only by an index number: Ring 1 is the MicroMMAC-T-managed ring; any additional rings are indexed in ascending order.

The field to the left of the Previous and Next buttons displays the selected ring in terms of total rings currently supported on the hub, in X (current ring) of X (configured rings) format.

To view the next ring in sequence, click on the Next button. When you have reached the last available ring, the Next button will be grayed out to indicate that no more rings are available.

To return to a prior ring, click on the Previous button. The Previous button will be grayed out when you reach the first ring detected by the MicroMMAC-T.

2-18	Managing the Hub

Image 36

Enterasys Networks MicroMMAC-T manual Viewing Network Information, Selecting the Ring

Contents

MicroMMAC-T Users Guide Page Virus Disclaimer Page Restricted Rights Notice Page Contents Contents Chapter Token Ring Statistics Chapter Token Ring Alarms Chapter Station List and Station MapIndex Contents Viii Introduction Using This Guide Introduction Using the Mouse Related ManualsSoftware Conventions Left Mouse Button Right Mouse Button Using Window Buttons Common MicroMMAC-T Window Fields Device Name IP AddressLocation MAC Address Using On-line Help Getting HelpGetting Help from Enterasys Global Call Center Introduction MicroMMAC-T Chassis View Viewing Chassis Information Front Panel Information Menu Structure TimeDate MicroMMAC-T Chassis View Menu Structure Device Menu Port Status Menu Network Menu Utilities Menu Help Menu Module MenusPort Menus Port Status Displays Ring Port MenusSelecting a Port Status View Errors LoadStatus Port Assignment Ring Port StatusPort Status Color Codes Chassis Manager Window Viewing Hardware TypesClick on MIBs Supported Managing the Hub Device TypeModule Type Management Station Configuration Accessing the TR Management Station Configuration Window Setting Station Name and Location Station Name Configuration Window Host Error Report Timer Delay Enable Beacon RecoverySpecifying Ring Management Functions Inhibit Active Monitor Enable Ring Poll Recovery Viewing Network Information Selecting the Ring Network Information Window Fields Ring of X Configured Rings Viewing Module StatusToken Ring Board Status Window Fields Board Number Accessing the Ring Port Status window Viewing Ring Port Status Last Wire Fault Ring Port Status Window FieldsPort Media Type Setting the Device Date and Time Using the Media Type and Phantom Current Radio Buttons Using an Uninterruptable Power Supply UPS 13. Device Date Change Window Accessing the UPS Window 14. The UPS Window Battery Output Battery CapacityUPS Uptime Line Voltage Resetting the Device Setting the UPS IDUsing the Test Option Using the Disconnect Option Enabling and Disabling Port Mapping Enabling and Disabling Link Traps 15. The Port Map Window Setting Token Ring Boards to Automode Enabling and Disabling Link Traps at the Board Level Enabling and Disabling Ports Enabling and Disabling Station PortsEnabling and Disabling Ring Ports Ring Out Enable/Disable Viewing I/F Summary Information Index TypeDescription Physical Status Interface Performance Statistics/Bar Graphs Raw Counts Rate Viewing Interface Detail Address Unicast Making Sense of Detail Statistics Transmitted Errors /Packets Transmitted Statistics Window Features Setting Total, Delta, or Cumulative Counts Viewing Elapsed, Average, and Peak Activity Levels Token Ring Statistics Setting the Statistics Poll Interval New Timer Interval Text Box Accessing the Network Statistics Selections Network Level StatisticsNetwork Statistics Window General Information Fields Ring Speed Ring Status FieldsStations Inserted Active Monitor Soft Error Fields Beacon Statistics Burst Errors Internal ErrorsAbort Sequences Congestion Errors Token ErrorsFrequency Errors Lost Frames Network Timer Statistics Total ErrorsNetwork Timer Statistics Window Fields Network Performance Graphs FramesKBytes Configuring the Network Performance Graph Network Performance Graph StatisticsNetwork Events Red Traffic Blue Frame Size Window Total and Delta Graph Display Using the Pie and Bar Radio Buttons Frame Sizes Window with Pie Chart Protocol Statistics Window Accessing the Management Station Statistics Selection Management Station Statistics Soft Errors Fields FC Errors Soft ErrorsHard Errors Fields Signals Lost Recoveries Lobe Wire FaultHard Errors Transmitted Beacons Accessing the Station Port Menu Port Level StatisticsStation Statistics Window Station Statistics Window General Fields Station NameLink Time Station Statistics Window Performance Fields Station Statistics Window Soft Error Fields Station Timer Statistics Window Station Timer Statistics Window Fields Port Performance Graphs Total Errors Red Port Performance Graph Statistics Configuring the Port Performance Graph Token Ring Statistics Token Ring Alarms Ring-Level Alarm Limits Accessing the Alarm Limits Window Ring-Level Alarm Limits for Network Events Ring-Level Station Alarms Token Errors Setting Ring-Level Alarm Limits Line Station-Level Alarm Limits Accessing the Station Alarm Limits Window from the Port Menu Token Ring Alarms Setting Station-Level Alarm Limits Station Alarm Limits Window Token Ring Alarms Station List and Station Map Station List Window Address Mode Station List Window FieldsGeneral Fields Number of Nodes/Stations Viewing Station Statistics Station Fields Viewing Station Timer Statistics Setting Station AlarmsRemoving a Station from the Ring Using the MAC/Canonical Button Viewing the Station Port Performance GraphPrinting the Station List Resetting Counters Station Map Station Map Window Fields Number of Nodes Viewing the Station Map Station Pop-up Text Boxes Station Map with Text Boxes Node Address Station Command Menu Manipulating the Station Map Magnifying a Portion of the Map Rotating the Station Map Resizing the Station Map Window Station List and Station Map Symbols Index Index-2 Index-3 Index-4