UPS Uptime, Line Voltage | Enterasys Networks MicroMMAC-T guide

The MicroMMAC-T Chassis View

UPS ID

Displays the manufacturer and model type code of the UPS attached to the modem port of the MicroMMAC-T. You must assign this type code for the UPS window to be active. (See Setting the UPS ID, below, for instructions for setting the type code for your UPS.) The valid type codes are:

•Model 370

•Model 400

•Model 600

•Model 900

•Model 1250

•Model 2000

UPS Uptime

Displays the number of hours that the UPS has been operating since the last time it was started up.

Line Voltage

Displays the voltage coming through the line attached to the MicroMMAC-T.

Battery Output

Displays the amount of battery output voltage.

Battery Capacity

Displays the percentage of remaining battery capacity (100% indicates a fully charged battery).

Test Results

Displays the result of the last self-test performed by the UPS. The possible test results are:

Unit OK	The UPS unit is in working order.
Unit Failed	The UPS unit has failed the self-test. Check the
	unit for damage or consult your UPS User’s
	Manual.
Bad Battery	The UPS unit battery is bad.
No recent test	No UPS self-test has been performed in the last
	five minutes.
Unit in test...	The UPS is currently in test mode.
Please standby

2-26	Managing the Hub

Image 44

Enterasys Networks MicroMMAC-T manual UPS Uptime, Line Voltage, Battery Output, Battery Capacity, Test Results

Contents

MicroMMAC-T Users Guide Page Virus Disclaimer Page Restricted Rights Notice Page Contents Contents Chapter Token Ring Statistics Index Chapter Token Ring AlarmsChapter Station List and Station Map Contents Viii Introduction Using This Guide Introduction Software Conventions Using the MouseRelated Manuals Left Mouse Button Right Mouse Button Using Window Buttons Common MicroMMAC-T Window Fields Device Name IP AddressLocation MAC Address Getting Help from Enterasys Global Call Center Using On-line HelpGetting Help Introduction MicroMMAC-T Chassis View Viewing Chassis Information Front Panel Information Date Menu StructureTime MicroMMAC-T Chassis View Menu Structure Device Menu Port Status Menu Network Menu Utilities Menu Port Menus Help MenuModule Menus Selecting a Port Status View Port Status DisplaysRing Port Menus Status ErrorsLoad Port Status Color Codes Port AssignmentRing Port Status Click on MIBs Supported Chassis Manager WindowViewing Hardware Types Module Type Managing the HubDevice Type Management Station Configuration Accessing the TR Management Station Configuration Window Setting Station Name and Location Station Name Configuration Window Host Error Report Timer Delay Enable Beacon RecoverySpecifying Ring Management Functions Inhibit Active Monitor Enable Ring Poll Recovery Viewing Network Information Selecting the Ring Network Information Window Fields Ring of X Configured Rings Viewing Module StatusToken Ring Board Status Window Fields Board Number Accessing the Ring Port Status window Viewing Ring Port Status Last Wire Fault Ring Port Status Window FieldsPort Media Type Setting the Device Date and Time Using the Media Type and Phantom Current Radio Buttons Using an Uninterruptable Power Supply UPS 13. Device Date Change Window Accessing the UPS Window 14. The UPS Window Battery Output Battery CapacityUPS Uptime Line Voltage Resetting the Device Setting the UPS IDUsing the Test Option Using the Disconnect Option Enabling and Disabling Port Mapping Enabling and Disabling Link Traps 15. The Port Map Window Setting Token Ring Boards to Automode Enabling and Disabling Link Traps at the Board Level Enabling and Disabling Ring Ports Enabling and Disabling PortsEnabling and Disabling Station Ports Ring Out Enable/Disable Viewing I/F Summary Information Index TypeDescription Physical Status Interface Performance Statistics/Bar Graphs Raw Counts Rate Viewing Interface Detail Address Unicast Making Sense of Detail Statistics Transmitted Errors /Packets Transmitted Statistics Window Features Setting Total, Delta, or Cumulative Counts Viewing Elapsed, Average, and Peak Activity Levels Token Ring Statistics Setting the Statistics Poll Interval New Timer Interval Text Box Accessing the Network Statistics Selections Network Level StatisticsNetwork Statistics Window General Information Fields Ring Speed Ring Status FieldsStations Inserted Active Monitor Soft Error Fields Beacon Statistics Abort Sequences Burst ErrorsInternal Errors Congestion Errors Token ErrorsFrequency Errors Lost Frames Network Timer Statistics Window Fields Network Timer StatisticsTotal Errors KBytes Network Performance GraphsFrames Configuring the Network Performance Graph Network Performance Graph StatisticsNetwork Events Red Traffic Blue Frame Size Window Total and Delta Graph Display Using the Pie and Bar Radio Buttons Frame Sizes Window with Pie Chart Protocol Statistics Window Accessing the Management Station Statistics Selection Management Station Statistics Soft Errors Fields FC Errors Soft ErrorsHard Errors Fields Signals Lost Recoveries Lobe Wire FaultHard Errors Transmitted Beacons Station Statistics Window Accessing the Station Port MenuPort Level Statistics Station Statistics Window General Fields Station NameLink Time Station Statistics Window Performance Fields Station Statistics Window Soft Error Fields Station Timer Statistics Window Station Timer Statistics Window Fields Port Performance Graphs Total Errors Red Port Performance Graph Statistics Configuring the Port Performance Graph Token Ring Statistics Token Ring Alarms Ring-Level Alarm Limits Accessing the Alarm Limits Window Ring-Level Alarm Limits for Network Events Ring-Level Station Alarms Token Errors Setting Ring-Level Alarm Limits Line Station-Level Alarm Limits Accessing the Station Alarm Limits Window from the Port Menu Token Ring Alarms Setting Station-Level Alarm Limits Station Alarm Limits Window Token Ring Alarms Station List and Station Map Station List Window Address Mode Station List Window FieldsGeneral Fields Number of Nodes/Stations Viewing Station Statistics Station Fields Removing a Station from the Ring Viewing Station Timer StatisticsSetting Station Alarms Printing the Station List Using the MAC/Canonical ButtonViewing the Station Port Performance Graph Resetting Counters Station Map Station Map Window Fields Number of Nodes Viewing the Station Map Station Pop-up Text Boxes Station Map with Text Boxes Node Address Station Command Menu Manipulating the Station Map Magnifying a Portion of the Map Rotating the Station Map Resizing the Station Map Window Station List and Station Map Symbols Index Index-2 Index-3 Index-4