Enterasys Networks MicroMMAC-T Enabling and Disabling Ports, Enabling and Disabling Station Ports

The MicroMMAC-T Chassis View

If you selected AutoMode, the module will now be configured to operate according to its default hardware settings. Note that if a set is made to the module using NetSight Element Manager, the module will automatically return to management mode.

Enabling and Disabling Ports

Enabling and Disabling Station Ports

From the Module and Port menus on the MicroMMAC-T Chassis View window, you can enable and disable all station ports on a selected module, as well as individual station ports, respectively.

To enable or disable all station ports on a selected module:

1.Click on the Module Index for the desired module. The Module pull-down menu will appear.

2.Click on Enable Station Ports to enable the ports, or Disable Station Ports to disable the ports.

The module’s station ports will now be enabled or disabled as desired.

To enable or disable an individual station port:

1.Click on the Port Index for the desired port. The Port menu will appear.

2.Click on Enable to enable the port, or Disable to disable the port. The port will now be enabled or disabled as desired.

Enabling and Disabling Ring Ports

From the Module and Ring Port menus on the MicroMMAC-T Chassis View window, you can enable and disable all ring-in/out ports on a selected module, as well as individual ring-in/out ports, respectively.

To enable or disable the Ring-in/Ring-out Ports on a selected module:

1.Click on the Module Index for the desired module. The Module pull-down menu will appear.

2.Click on Enable Ring Ports to enable the ports, or Disable Ring Ports to disable the ports.

The module’s Ring-in/Ring-out ports will now be enabled or disabled as desired.

Managing the Hub 2-31