The MicroMMAC-T Chassis View
Front Panel Information
The areas around the main port display provide the following device information:
IP
The IP address assigned to the MicroMMAC-T appears in the title bar of the Chassis View window; this field will display the IP address you have used to create the MicroMMAC-T icon. IP addresses are assigned via Local Management.
Connection Status
This color-coded area indicates the current state of the MicroMMAC-T in communicating with the NetSight Element Manager.
•Green indicates it is responding to device polls (valid connection).
•Magenta indicates it is in a temporary stand-by mode while it responds to a physical change in the hub; note that port menus are inactive during this stand-by state.
•Blue indicates an unknown contact status – polling has not yet been established with the MicroMMAC-T.
•Red indicates it is not responding to device polls (device is off line, or device polling has failed across the network for some other reason).
UpTime
The amount of time, in a day(s) hh:mm:ss format, that the MicroMMAC-T has been running since the last start-up.
Port Status
If management for your device supports a variable port display (detailed in Port Status Displays, page 2-9), this field will show the display currently in effect. If only a single port display is available, or if the default view is in effect, this field will state Default.
MAC
The physical layer address associated with the IP address used to define the MicroMMAC-T icon. MAC addresses are hard-coded in the device, and are not configurable via NetSight Element Manager. The device’s MAC address may be altered using local management; if so, the locally administered MAC address will appear in this field.
Boot Prom
The revision of BOOT PROM installed in the MicroMMAC-T.
Firmware
The revision of device firmware stored in the MicroMMAC-T’s FLASH PROMs.