z
Log on
z
Log on
Start the Phone – Log On/Off
LAN access control (network authentication)
(Dialog 4425 v. 2 phone only).
Your telephone might require a network authentication to gain access to the network. In this case you must enter a valid user identity and password.
Note: The user identity and password used for the network authentication is not the same user identity and password you use to log on. The password is obtained from, and can only be changed by the system administrator.
| Settings CallList |
| Contacts | ? |
|
User administrator mode to change IP settings |
| ||||
|
| ||||
|
|
|
| (x) | |
|
|
|
| (No change) |
|
Enter your user identity.
(The display menu key Erase, is used to remove a wrong entry.)
Press (see display).
Enter your password.
(The display menu key Erase, is used to remove a wrong entry.)
Note: The password can be entered with letters or numbers, see section “Write Text” on page 90.
Press (see display).
If your user identity and password are accepted, the phone continues with the startup procedure.
Note: If your user identity and password are not accepted, contact your system administrator.
BusinessPhone – Ericsson Dialog 4425 IP Vision | 21 |
