Start the Phone – Log On/Off
Start the Phone
Connect the phone to the local network.
See the Installation section, “Install cables” on page 135.
If an external power adapter is used:
Connect the adapter to the mains and connect the plug from the adapter to “POWER” on the underside of your phone. See the Installation section, “Install cables” on page 135.
After a few seconds the Headset key lamp will light for about five seconds, then the displays shows:
Settings CallList
Contacts?
User administrator mode to change IP settings
(x)
(No change)
The x indicates a timer counting down seconds. If no key is pressed during this time, “no change” is selected automatically.
Notes: The administrator mode is used to change the IP settings of the phone. All administrator mode changes should be done by your system administrator.
If you want to use the previously stored settings, you can speed up the procedure by pressing the Loudspeaker key.
Now the display informs you that the phone is connecting to the server and that the software is loading. This takes about
15 seconds. After a
20 | BusinessPhone – Ericsson Dialog 4425 IP Vision |