Gateway 312785C important safety instructions Modbus and I/O Data

Modbus and I/O Data

Table 1: ProMix 2KS Digital Inputs (Modbus Register 40040)

Bit	Digital Input Binary																Name	Details
0:5	0	0	0	0	0	0	0	0	0	0	X	X	X	X	X	X	Recipe	Binary bits for viewing discrete inputs only.
6	0	0	0	0	0	0	0	0	0	1	0	0	0	0	0	0	Color Change	Set bit to “1” to initiate Color Change (momentary)
																	(CC)
7	0	0	0	0	0	0	0	0	1	0	0	0	0	0	0	0	Mix	Set bit initiate Mix mode (maintain)
8	0	0	0	0	0	0	0	1	0	0	0	0	0	0	0	0	Purge	Set bit to “1” to initiate Purge sequence (maintained)
9	0	0	0	0	0	0	1	0	0	0	0	0	0	0	0	0	Job_Complete	Set bit to “1” to initiate Job Complete input (momen-
																		tary)
10	0	0	0	0	0	1	0	0	0	0	0	0	0	0	0	0	External CC	Set bit to “1” to initiate External Color Change
																	Ready	(momentary)
11	0	0	0	0	1	0	0	0	0	0	0	0	0	0	0	0	Not Used
12	0	0	0	1	0	0	0	0	0	0	0	0	0	0	0	0	FC _Calibrate	Set bit to “1” to initiate a Flow Control Calibrate input
																		(momentary)
13	0	0	1	0	0	0	0	0	0	0	0	0	0	0	0	0	Gun_Trigger	Set bit to “1” to indicate the gun is actually triggered
																		(maintain while gun is triggered, remove when gun is
																		closed)
14	0	1	0	0	0	0	0	0	0	0	0	0	0	0	0	0	Reset_Alarm	Set bit to “1” to clear an active Alarm (momentary)
15	1	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	Remote Stop	Set bit to remotely stop unit (momentary)

NOTE: Shaded cells relate to the flow charts on pages 23-26.

312785C 27